Annke vision for pc

Author: u | 2025-04-25

Annke Vision - Access the DVR/NVR System via ANNKE Vision software on PC (Via P2P Cloud) Annke Vision - More Page (Account Settings) on Annke Vision App; Annke Vision - How to

Annke Vision - Enabling Annke Vision

View tab page, click on the folder under the Camera list to expand the camera channels. Double-click on the channels to see the live streaming.Annke Vision – Access the DVR/NVR System via ANNKE Vision software on PC (Via P2P Cloud)This article shows you the steps to access the ANNKE system on a computer via the client software ANNKE Vision.Adding via P2P Cloud allows remote access (ANNKE system and computer can be in the different network/router). While you may find the camera live view/playback and recordings download become laggy due to unstable network.To access the system locally on ANNKE Vision, please add via IP address. See this instruction.Steps:1. Download and install the software Annke Vision on your computer.Here is the download link: Plug the ANNKE system into your router via an Ethernet cable.3. Run the software ANNKE Vision. Register an administrator account and set up Password Protection.Note: This account is only for logging in to ANNKE Vision. It’s not the same as your ANNKE system account. (It is suggested to select “Enable Auto-login”)The username and password can be anything.4. Register an account (P2P account) on the mobile app Annke Vision.Register an account on Annke Vision via your phone number or email address.5. Come back to ANNKE Vision. Go to Device Management and click Add. Choose Cloud P2P and select your country/area(the phone APP account area), and click Login.7. Then log in with the user name and password of your Annke Vision APP account.Note: If your user name is the phone number, please input it in this format ‘+441234567890‘ (no space between the country code and the phone number).If the user name and password are both correct, but the App keeps asking you entering a verification code, please log in again with email address that you used to register the Annke Vision App.8. If the ANNKE system has been added to the Annke Vision account beforehand, you can see it on the list automatically.Otherwise, add the system to ANNKE vision account first.9. Go to the Main View tab page, and click on the folder(the name is your APP account username) under the Annke Vision PC Software Guide, PC View Access the system on the PC, and view the cameras on the PC This article shows you the steps to access the ANNKE system on a computer via the client software Guarding Vision.Annke Vision – Access the DVR/NVR/IP Camera via Guarding Vision Software on PC (Via IP Address)This article shows you the steps to access the ANNKE system on a computer via the client software Guarding Vision.Adding via IP address only allow local access (ANNKE system and computer must be in the same network/router). But you will get a better experience when watching camera live view/playback and download recordings, etc.To access the system remotely on Guarding Vision, please add via P2P Cloud. See this instruction.Read Next :Milesight VMS Enterprise Setup GuideHikvision Password Reset Do It YourselfNVMS7000 Setup GuideVideo Guide:Step by Step:1. Download and install the software Guarding Vision on your computer.For Windows, click here to download.For Mac, click here to download.2. Plug the ANNKE system into your router via an Ethernet cable.3. Make sure your computer has been connected to the same router as the ANNKE system/IP camera.4. Run the software Guarding Vision. Register an administrator account.Note: This account is only for logging in to Guarding Vision. It’s not the same as your ANNKE system account. (It is suggested to select “Enable Auto-login)5. Run the software, and go to Device Management -> Device Type ­-> Device.If the system and computer are in the same LAN network, you can see the device information under the Online Device list. Select your device, click on Add to Client.6. On the pop-up page, set the details as the picture below shows, then click on ‘Add’.Note:The IP address of the system may vary from the network. Ensure the IP address you input is correct.The user name must be ‘admin’.Password is the one you used to log in to your system on the monitor/TV.Remember to tick Export to Group.7. The device information will then be shown on the tab page Device for Management. You can see the Net Status is online as the picture shows.8. Go to the Main

Annke Vision - Setting Time on Annke Vision – ANNKE

Device list to expand the camera channels. Click the play button on the channels to see the live streaming.Annke Vision – Access the DVR/NVR System via ANNKE Vision Software on PC (Via IP Address)This article shows you the steps to access the ANNKE system on a computer via the client software ANNKE Vision.Adding via IP address only allow local access (ANNKE system and computer must be in the same network/router). But you will get a better experience when watching the camera live view/playback and download recordings, etc.To access the system remotely on ANNKE Vision, please add via P2P Cloud. See this instruction.Step by Step:1. Download and install the software ANNKE Vision on your computer. Here is the download link: Plug the ANNKE system into your router via an Ethernet cable.3. Make sure your computer has been connected to the same router as the ANNKE system.4. Run the software ANNKE Vision. Register an administrator account and set up Password Protection.Note: This account is only for logging in to ANNKE Vision. It’s not the same as your ANNKE system account. (It is suggested to select “Enable Auto-login”)The username and password can be anything.5. Run the software, and go to Device Management.6. Click Online Device. If the system and computer are in the same LAN network, you can see the device information at the bottom.7. Select your device, and click on Add. Then please fill in the information in the popped window.Note:The name can be anything.The IP address of the system may vary from the network. Ensure the IP address you input is correct.The user name must be ‘admin’.Password is the one you used to log in to your system on the monitor/TV.Remember to tick Import to Group.8. The device information will then be shown on the tab page Device for Management. You can see the Net Status is online as the picture shows.9. Go to the Main View tab page, and click on the folder under the DVR list to expand the camera channels. Click the play button on the channels to see the live streaming.Annke Vision – How to Live Stream. Annke Vision - Access the DVR/NVR System via ANNKE Vision software on PC (Via P2P Cloud) Annke Vision - More Page (Account Settings) on Annke Vision App; Annke Vision - How to

Annke Vision - Enabling Annke Vision Service – ANNKE

Follow Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT41DB/DT61EQ/DW81KD/DW61LD/DT81DP/N48PI/N46PI/N44PI/N44PAM/N48PAW/N46PCK/N88PCH/N441Y/N481Y/I21AE/I21AF/I41DQ/I61DQ/I61DR/I61DS/I41HG/I41CS/C800/C500/B1200/NC400/CZ500/CZ400/S500/S300/FC200/NCK800/H800/H500 Purpose:When the ANNKE device has the audio ability (equipped with a microphone and a speaker), you can hear audio from the device on the Annke Vision app by following the below steps.Steps:1. Connect the microphone and the speaker to the ANNKE device, and configure audio settings on the ANNKE device. Refer to this article:Annke Vision - How to Make Recordings with Sound on DVR/NVR?2. On the Annke Vision, touch on the 'Audio' icon when watching a live stream or playback from the camera.Note: 1. For the ANNKE device with one Audio In port, only the camera on Channel #1 is capable of audio.2. The microphone and the speaker needs to be placed near the camera location for the two-way audio purpose.If you find this article helpful, please click 'Yes' at the end of this article; If you have any suggestions or questions for this article, please leave a comment in the below comment zone. ---> Related articles Annke Vision - How to Set Up Audio on Web Interface? Annke Vision-How to Use The PTZ Function on The APP? Annke Vision - I61DY_I51DJ_I91BD User Manual Annke Vision - How to Find The Camera's IP Address? Annke Vision - Wie richte ich eine Bewegungserkennungsaufzeichnung ein? (S500-Serie DE) Follow Applies to: DH81NK/DH41NK/DM21O/DM31O/DL81A/DH81S/DH81NG/DN81NB/DM41G/DN41CJ/DN81BJ/DN61EC/DG81W/DG61X/DG41T/DT81DQ/DT41DC/DT61ERIf you find the camera‘s live view box is too small to occupy the full the screen of the monitor like this picture below shows, you can refer to these steps below to adjust.1. Please right-click the mouse and go to Main Menu-Advanced-Output Adjust.You can find the parameter of "Top Deflate", "Bottom Deflate", "Left Deflate", "Right Deflate" is not 0, it’s not correct.2. You can adjust these four parameters to 0. And then click OK.3. Now, you can see the cameras’ live view box is normal. ---> Related articles Annke Vision - How to Adjust the Output Resolution of The System to The Monitor for a More Clear Image? Annke Vision - What To Do When an Annke Camera Doesn’t Show its Image Annke Vision - Set up Live View Configuration on Annke DVR/NVR Annke Vision - Modify Output Resolution of ANNKE Systems on the Web Interface XMEye- How to Set up DST for DVR and NVR?

Annke Vision - Setting Time on Annke Vision ANNKE

New password should contain 8-16 characters with at least two combinations of numbers, lowercase, uppercase, and special characters, no ‘admin’ included.7. Access the camera by inputting the IP address of the camera on the IE web browser.Then, input the user name admin and password you created.Note: The cameras could be viewed on the IE web browser only because there is no web plug-in for any other web browser now.8. Click the link to download the web plug-in to view the camera:9. Once the web plug-in is installed successfully, the camera could be viewed on the web browser:Annke Sight – How to Connect System to Annke Sight Software on Computer?Purpose: This instruction will help you how to view cameras on the computer by Annke sight software.Steps:1. Power on NVR and connect the recorder to the router by Ethernet cable.2. Go to System setup—Network setup to check if P2P is online. It must be online if you want to remote view.If it is offline, please refer to the link below to make it online at first. Download Annke Sight and install it on your computer. Here is the software download link.For Windows PC: Mac PC: Please run the Annke sight, then it will pop up on the login page.There are two ways to log in to the software.1) Login Local: The default user name is “admin”, and the default password is empty (means you don’t need to input anything).2) Login Cloud: Please log in with your cloud account (the account you used to log in to the phone app Annke Sight).5. Tap Add on the right-top of the interface, and the Add Device window will pop up.6. Add your NVR by following the below pictures, and tap Finish to add the device.Annke Vision – How to Access DVR/NVR System on The Web Browser from PC(in the Same Local Network)?General steps:1. Plug the DVR/NVR into a router with a network cable.2. Find DVR/NVR’s IP address. There are two ways to find the IP address:Method #11) Find the IP address on the TV/monitor.Please go to Menu–Configuration–Network–General.Method #2Find the IP address on a computer.1) Video

Annke Vision - Logout Annke Vision App – ANNKE

Load when clicking the button “Start Live View “on the webpage, please try the below solutions:1. Click the “Download Plug-in” button to download and install the webpage plugin.2. Copy the webpage address then visit it via IE browser, or via Microsoft Edge browser (requires reloading the page into IE mode).Annke Vision – How to Access the Annke IP Camera’s Setting Page via Web Browsers?Purpose:Some of the cameras’ functions can only be configured in their individual setting page. Below is the instruction to enter Annke’s IP cameras’ individual setting page.Step 1:Connect your IP camera and your computer to the same network/router. The connection can be either via ethernet cable or WiFi.Step 2:Find the IP address of your IP camera. The procedures depend on your computer.a). If your computer is NOT a Windows computer: Please access your router to find the camera’s IP address (You may need to contact your router’s seller for further information).b). If your computer is a Windows computer: You can use the software called SADP TOOL to find the IP address. Below are the steps:b-1). Please download and install the software SADPTOOL.exe to your computer: Run the software and you will find the camera’s IP address on the device list.b-3). Double-click on the IP address (or input it into your web browser manually) then you will see the camera’s login page. Input the user name ‘admin’ and the camera’s password to proceed.b-4). Click on the Configuration tab to enter the camera’s settings page.Note: The web page layout may be a little different according to different camera models.Annke Vision – Modify Output Resolution of ANNKE Systems on the Web InterfacePurpose: This instruction introduces the method to change the output resolution of the ANNKE system. It is effective when the ANNKE system doesn’t show any display on the TV/monitor due to a mismatch of output resolution between them.Steps:Connect your ANNKE system to your home router via an ethernet cable.Connect your computer to the same router with the DVR wired or wirelessly.Download the SADP software on your computer to search the IP of your DVR/NVR.For Windows: MacBook: SADP and it will. Annke Vision - Access the DVR/NVR System via ANNKE Vision software on PC (Via P2P Cloud) Annke Vision - More Page (Account Settings) on Annke Vision App; Annke Vision - How to

Annke Vision - Adding Annke Vision Device to Annke Vision App

Follow Applies to: DH81NK/DH41NK/DM21O/DM31O/DL81A/DH81S/DH81NG/DN81NB/DM41G/DN41CJ/DN81BJ/DN61EC/DG81W/DG61X/DG41T/DT81DQ/DT41DC/DT61ER1. Please refer to this link below to connect your DVR to computer software. Please go to this picture below to tick the ‘Playback’ option.3.Please refer to this picture,step 1,step2,step 3,step 4,step 5,step 6,step 7 to choose the file that you want to download.4. You can see this picture when you tick the ‘Download ‘ option and then you can choose the Record Type and Record DIR.5. Finally, you can go to the Record DIR that you choose to check the video file. And if you want to play these videos files, pls use this player software. ---> Related articles XMeye - How to Connect DVR/NVR on Computer Software CMS? Annke Vision - How to Download/Back Up Videos from ANNKE systems? (General Steps) XMeye - How to Take Recording or Snapshot to Phone's Storage? XMeye - How to Play Back Videos? Annke Vision - How to Export The Footage to a USB Stick/Drive? (S500)